This happened

Have a question on how to keg your beer or just want some tips on bottling! Don't stick a cork in it until you ask the Borg!

Moderators: BlackDuck, Beer-lord, LouieMacGoo, philm00x, gwcr

Post Reply
User avatar
Beer-lord
Moderator
Moderator
Posts: 9634
Joined: Mon Aug 05, 2013 2:48 pm
Location: Burbs of the Big Easy

This happened

Post by Beer-lord »

I got 2 of my CO2 tanks filled yesterday. I came straight home to keg a beer and put the 10lb one outside under cover and the 5lb one was going to go in the kegerator but I left it on the kitchen floor while I was getting ready to keg my beer. I went outside to grab some stuff and heard a very loud pop then screaming hissing. I rain in to see a good portion of my kitchen foggy. I grabbed the tank which had fallen from whatever was happening and put it outside until it stopped just a few seconds later.
Of course it was empty obviously overfilled and the relief valve went off. I wondered why the whole cylinder was frosted the whole trip home and for the next 15 minutes inside my house until it blew up. Never seen that before.
My question is, does anything need to be done to the relief valve before filling again? Not sure if it was overfilled but the tank is a few years old and in excellent condition. I'm gong to bring it back this week and let them know what happened and hope they know what they're doing because had that gone off in my car, I would have shat myself!
PABs Brewing
Planning
Brew good beer and live a hoppy life
Fermenting

Drinking
Disfucted
Smelly Hops
(split batch) A Many Stringed Bow
Up Next
Men In Black
User avatar
berryman
Brew Guru
Brew Guru
Posts: 3279
Joined: Tue Aug 20, 2013 5:16 pm
Location: Western NY

Re: This happened

Post by berryman »

:wow: I know propane tanks can vent off if are over filled and sit in the sun and get too warm, would guess c02 would do it also. I think at least looking at mine, it looks more like some kind of blow off cap that would have to be replaced. Must be you own your tanks? I get mine exchanged at the welding supply.
Happy Hound Brewery

“I have not failed. I've just found 10,000 ways that won't work.”
― Thomas A. Edison
User avatar
Beer-lord
Moderator
Moderator
Posts: 9634
Joined: Mon Aug 05, 2013 2:48 pm
Location: Burbs of the Big Easy

Re: This happened

Post by Beer-lord »

Yes, I've got a place just 2 miles away that fills while you wait. Reasonable and fast. Never had a problem. They do exchange but there's been no reason for me to. This IS actually a welding supply place too!
PABs Brewing
Planning
Brew good beer and live a hoppy life
Fermenting

Drinking
Disfucted
Smelly Hops
(split batch) A Many Stringed Bow
Up Next
Men In Black
User avatar
mashani
mashani
mashani
Posts: 6743
Joined: Sat Aug 10, 2013 11:57 pm

Re: This happened

Post by mashani »

I'm glad that didn't go off in your car while you were in it, breathing that in an enclosed space would not have been great.

Other then that I have no idea.

But it reminded me of when I was a kid the time the propane plant a few miles away blew up. We saw tanks, large and small, flying through the air like uncontrolled rockets, flames shooting out of the various holes in them, some landed as far as like 1/2 mile away in peoples yards. That was exciting.
User avatar
Beer-lord
Moderator
Moderator
Posts: 9634
Joined: Mon Aug 05, 2013 2:48 pm
Location: Burbs of the Big Easy

Re: This happened

Post by Beer-lord »

Took the tank back today and was told overfilling will not cause the relief valve to blow. Not sure I believe that but they do fill by weight. I thought they'd at least give me the fill for a discount but charged me $15 to put on a new relief cap and $15 to fill.
Life goes on.
PABs Brewing
Planning
Brew good beer and live a hoppy life
Fermenting

Drinking
Disfucted
Smelly Hops
(split batch) A Many Stringed Bow
Up Next
Men In Black
User avatar
BlackDuck
Moderator
Moderator
Posts: 5156
Joined: Wed Aug 07, 2013 7:49 am
Location: Canal Winchester, Ohio

Re: This happened

Post by BlackDuck »

So if overfilling doesn’t cause the relief valve to blow, what the hell is the relief valve for???


Sent from my iPhone using Tapatalk
ANTLER BREWING
Drinking
#93 - Gerst Amber Ale
Conditioning and Carbing

Fermenting

On Deck
User avatar
Beer-lord
Moderator
Moderator
Posts: 9634
Joined: Mon Aug 05, 2013 2:48 pm
Location: Burbs of the Big Easy

Re: This happened

Post by Beer-lord »

Good question but I don't believe just because they fill tanks, they know anything. Nowadays, no one knows anything but the internet! :)

I did find this:
https://www.generalair.com/pdf/Tech%20T ... inders.pdf
All tanks are supplied with a pressure relief valve for maintaining safe tank pressure for specific applica-tions. Typically, these are shipped to the customer at 22 psi for liquid withdrawal, and up to 350 psi for higher pressure requirements. When the pressure in the tank reaches its release point, this valve will evacuate the excessive pressure. When the pressure falls back below these levels, the valve closes again.
PABs Brewing
Planning
Brew good beer and live a hoppy life
Fermenting

Drinking
Disfucted
Smelly Hops
(split batch) A Many Stringed Bow
Up Next
Men In Black
Post Reply