I know this isn't going to win anything, nor do I really want it to, but since you asked for brew stories, here's mine.
I was about three batches in on my home-made mash tun. It's a good mash tun, but as with almost any DIY project, there are glitches and SNAFUs that no amount of troubleshooting can foresee. In fact, the only glitch/SNAFU is what necessitates this entry.
This is a fairly ordinary mash tun. After all, when you think about it, the design of a mash tun really can't vary all that much. It's like designing a better spoon -- you can't improve too much on the basic design. So I had an insulated cooler, a brass spigot, and a CPVC manifold. Like a million other homemade tuns.
My difficulty came in the connection from the manifold to the spigot. It didn't sit quite right; slightly loose. Could become detached if disturbed.
Which happened one brewday. I think it was over-enthusiastic stirring while mashing in. I must have bumped the manifold with the spoon and detached it from the spigot. Of course, there was no way of knowing this until after the rest. I opened the spigot to collect the first runnings and ..... nothing.
So I figured it out, and decided I needed to re-attach the manifold to the spigot.
I also decided to do this with my bare hand, plunging it repeatedly into grain/liquid that was around 155 degrees. I couldn't stand the scalding temperatures long enough to actually re-attach the manifold, and after about four or five attempts (and many very bad words screamed at maximum volume) I decided the best alternative course of action would be to scoop the stuff out until I could actually access the manifold, reattach it, then return everything to the tun and drain it.
Which is what I did, and the batch didn't suffer at all. I can't say the same for my hand, though. I removed a couple layers of skin from an area about 1" square at the base of my thumb, and had to wear a bandage for a couple of weeks until it healed over. Even now, many months later, it's still slightly discolored there.
My Best Story - Skin in the Game
Moderators: BlackDuck, Beer-lord, LouieMacGoo, philm00x, gwcr
- FedoraDave
- FedoraDave
- Posts: 4208
- Joined: Fri Aug 09, 2013 5:52 pm
- Location: North and west of the city
- Contact:
My Best Story - Skin in the Game
Obey The Hat!
http://www.homebrew-with-the-hat.com
Some regard me as a Sensei of Brewing
http://www.homebrew-with-the-hat.com
Some regard me as a Sensei of Brewing
Fedora Brauhaus
Re: My Best Story - Skin in the Game
Now that is true beer making dedication, not even thinking of pain or bodily harm.........Have to save the beer.
Happy Hound Brewery
“I have not failed. I've just found 10,000 ways that won't work.”
― Thomas A. Edison
“I have not failed. I've just found 10,000 ways that won't work.”
― Thomas A. Edison
- FedoraDave
- FedoraDave
- Posts: 4208
- Joined: Fri Aug 09, 2013 5:52 pm
- Location: North and west of the city
- Contact:
Re: My Best Story - Skin in the Game
Dedicated, yes. Really bright, not so much.
Obey The Hat!
http://www.homebrew-with-the-hat.com
Some regard me as a Sensei of Brewing
http://www.homebrew-with-the-hat.com
Some regard me as a Sensei of Brewing
Fedora Brauhaus