Yes BrewDemon and Mr. Beer kits are pretty darn easy but sometime you need a little help from the Borg to get you on the right track. Post your questions here!
Found a nice device at Lowe's yesterday for aerating wort in the LBK or LBC. It's a "Blue Hawk 1 gallon paint mixer" that works with your drill. It was $6.97 + tax. ($7.44)
Haven't used it yet but I'll be adding it to my sanitation bucket next batch. Should beat getting all spastic with my long handle spoon! Just a heads up in case anyone else might be interested.
20131027_085720.jpg (100.1 KiB) Viewed 2516 times
20131027_085257.jpg (128.81 KiB) Viewed 2516 times
20131027_085200.jpg (128.93 KiB) Viewed 2516 times
As long as it's clean and sanitized, that thing will work. I've read on other forums where a number of brewers use this and have given them good results.
PABs Brewing
Planning Brew good beer and live a hoppy life Fermenting
Drinking
Disfucted
Smelly Hops
(split batch) A Many Stringed Bow Up Next
Men In Black
Nice, like Paul and John said, that will work and don't scratch.
But the real burning question is "how the heck do you keep that desk top clean and tidy". Mine looks like a small explosive device has gone off in the room.
Naked Cat Brewery On Tap
Yazoo Sue Smoked Porter
Octoberfest
Le Petite Saison
Czech Pale Lager
A Toast to Big Fuzzy Russian Imperial Stout at 10%
Belgian Blond
Flower Power IPA
4 Kilts Clueless Belgian Strong
One Wort Two Yeast with Wyeast 2206
One Wort Two Yeast with WLP940
Shipwreck Saison
Inkleg wrote:Nice, like Paul and John said, that will work and don't scratch.
But the real burning question is "how the heck do you keep that desk top clean and tidy". Mine looks like a small explosive device has gone off in the room.
It's a like a movie setup. It's all a facade. The mess is off camera!
Make sure that debris from the drill doesn't fall into the wort. I know my drill has sawdust in nooks and crannies, and I'd be concerned as to what drops in. I might make a shield that's a lot bigger than the opening blocks the opening off to catch stuff.
I have over 9,000 posts on "another forum", which means absolutely nothing. Mr. Beer January 2014 Brewer of the Month with all the pomp and circumstance that comes with it...
Certificate in Brewing and Distillation Technology
Beers I regularly brew:
Bell's Best Brown clone
Irish Hills Red - I call this "Ann Arbor Red"
Mackinac Island Red - I call this "Michigan Red"
Oatmeal Stout - I call this Not Fat, Stout - Oatmeal Stout
Bottled 5 gallons of Ann Arbor Red on 4/18/17. Bottled 5 gallons of Michigan Red on 5/8/17.
Brewed in 2017 - 22.13 gallons (19.91 in 2012, 48.06 in 2013, 61.39 in 2014, 84.26 in 2015,46.39 in 2016)
Brewed in lifetime - 282.14 gallons
Drinkable beer on hand - 13.58 cases, with 6.11 cases ready in May and early June.
Average cost per 12 pack through all beer brewed - $6.27(ingredients only)
BrownstotheBone wrote:It's a like a movie setup. It's all a facade. The mess is off camera!
Touché
I'm putting a package together for you. Let you know when it's on the way.
Naked Cat Brewery On Tap
Yazoo Sue Smoked Porter
Octoberfest
Le Petite Saison
Czech Pale Lager
A Toast to Big Fuzzy Russian Imperial Stout at 10%
Belgian Blond
Flower Power IPA
4 Kilts Clueless Belgian Strong
One Wort Two Yeast with Wyeast 2206
One Wort Two Yeast with WLP940
Shipwreck Saison
RickBeer wrote:Make sure that debris from the drill doesn't fall into the wort. I know my drill has sawdust in nooks and crannies, and I'd be concerned as to what drops in. I might make a shield that's a lot bigger than the opening blocks the opening off to catch stuff.
Good point Rick. I was thinking about that. Maybe a piece of Plexiglas or plastic with a hole drilled in it to hold over the LBK hole. Or even a spare lid with the shaft stuck through a hole. Need to come up with something.
RickBeer wrote:Make sure that debris from the drill doesn't fall into the wort. I know my drill has sawdust in nooks and crannies, and I'd be concerned as to what drops in. I might make a shield that's a lot bigger than the opening blocks the opening off to catch stuff.
Good point Rick. I was thinking about that. Maybe a piece of Plexiglas or plastic with a hole drilled in it to hold over the LBK hole. Or even a spare lid with the shaft stuck through a hole. Need to come up with something.
Yes, good advice. I'm sure you'll be able to come up with something that works well.
FWIW, I use a wine degasser for my five-gallon batches. It fits in my drill, and also fits nicely through a carboy bung, so I can sanitize the degasser and the bung, and I'm good to go. Works great! Lots of foamy aeration!
Up Next: FedoraDave's American Ale Fermenting/Conditioning Natural 20 Pale Ale -- Bull Terrier Best Bitter -- King Duncan's Porter -- Schöenwald Schwarzbier -- Littlejohn's Ale Drinking: Crown Top Pale Ale
FWIW one day I was whipping up some stuff in the kitchen and the handle fell off my wisk. On the way to the garbage can a lightbulb went off in my head and I realized it was now just the right size to chuck in my drill. Works like a champ! But it is getting a bit long in the tooth so may have to try the paint mixer next time I hit the improvement store.
Silverleaf Vineyard & Winery / Old Mission Hops Exchange / Porchside Vineyard / The North York Brewing Company
Well there already was a couple of blenders in my kitchen so all I had to do was dedicate one to brewing gear and it works great. Wipe it down with Star San and use one blade; it doesn't touch the sides or bottom of the LBK at all just sits right in the center of the opening.
Brewbirds wrote:Well there already was a couple of blenders in my kitchen so all I had to do was dedicate one to brewing gear and it works great. Wipe it down with Star San and use one blade; it doesn't touch the sides or bottom of the LBK at all just sits right in the center of the opening.
I was holding the paint mixer down inside a spare LBK last night and there's more space than I thought in there. Especially deep. There's the whole trub portion as well.
I would have to get but just below the wort/water line to make some noise and that would be way safe. So I feel a little better after actually fitting it in there.
Really appreciate everyone's input and advise as well!
It looks fantastic but like others, I would be afraid of scratches.
I've taken to using a handheld mixer I inherited from the wife when I "accidentally " ran water on it. She got scared and I let it dry out a couple of weeks before I used it.
Works fantastically. Can fill the head space with foam in just a couple of minutes!
Cheers!
