Palisade hops
Moderators: BlackDuck, Beer-lord, LouieMacGoo, philm00x, gwcr
- teutonic terror
- Brew Master
- Posts: 635
- Joined: Fri Aug 09, 2013 2:16 pm
- Location: Virginia
Palisade hops
I received 2 oz of Palisades from Yakima Valley last week.
I've never used this hop before and was wondering what to expect.
They are 5.6 AA. I've got a 2.5 gal AG batch I'm planning for this weekend and I was wondering if I should use them by themselves or mix them with another hop. I still have a couple of ounces of Amarillo and a couple of ounce of Citra.
Any thoughts?
Thanks!
I've never used this hop before and was wondering what to expect.
They are 5.6 AA. I've got a 2.5 gal AG batch I'm planning for this weekend and I was wondering if I should use them by themselves or mix them with another hop. I still have a couple of ounces of Amarillo and a couple of ounce of Citra.
Any thoughts?
Thanks!
Re: Palisade hops
I did an Anniversary IPA from Austin Homebrew not too long ago that had Palasades in the boil and in the dry hop. Sadly, when I opened the pack to dry hop they went all over the place and I couldn't use them but I did have enough in the boil as a late addition to taste the difference and I liked it.
What is it you are brewing? If you are using both Palasades and Citra or Amarillo, I'd suggest the Citra or Amarillo for the dry hop and the Palasades for the late addition hop.
What is it you are brewing? If you are using both Palasades and Citra or Amarillo, I'd suggest the Citra or Amarillo for the dry hop and the Palasades for the late addition hop.
PABs Brewing
- teutonic terror
- Brew Master
- Posts: 635
- Joined: Fri Aug 09, 2013 2:16 pm
- Location: Virginia
Re: Palisade hops
Thanks Beer-lord!
I was looking at maybe trying to do a SMaSH with just the Palisades.
Maybe an APA.
I'm going to have to add a 1/2 oz of Dingemans Chocolate to get the color right though!
I'm really concerned that the Palisade won't be heavy enough to give me alot of flavor with only 2 ounces,
and if either the Amarillo or Citra would compliment it!
Also, I was considering using the Palisade as a late addition only, 20 minutes on, no bittering or first wort hopping if I did and APA.
I was looking at maybe trying to do a SMaSH with just the Palisades.
Maybe an APA.
I'm going to have to add a 1/2 oz of Dingemans Chocolate to get the color right though!
I'm really concerned that the Palisade won't be heavy enough to give me alot of flavor with only 2 ounces,
and if either the Amarillo or Citra would compliment it!
Also, I was considering using the Palisade as a late addition only, 20 minutes on, no bittering or first wort hopping if I did and APA.
Re: Palisade hops
Yes, Citra and or Amarillo would be fine...teutonic terror wrote: I'm really concerned that the Palisade won't be heavy enough to give me alot of flavor with only 2 ounces, and if either the Amarillo or Citra would compliment it!
Also, I was considering using the Palisade as a late addition only, 20 minutes on, no bittering or first wort hopping if I did and APA.
See the following Hop Substitution Graph for some insight...
Connected hops play nice as compliments / substitutes.
Hop Substitution Graph
Might need a small bittering charge of something (good time to use up some scraps from your inventory for that!)
I have been having good luck with a modest bittering charge at 30-45...
Then Hop-Bursting at 20, 15, 10, 5 and 1: (small amount at 20, larger at 15, larger still at 10 etc..)
Then a pretty large charge at flameout and I have been leaving that in as a hop stand (sometimes with the rest of the boil hops if I need more IBU's...) for about 30 minutes... During the 30 minutes, I just stir to whirlpool and let it sit so it starts to slowly cool... Then begin the real chillin' at 30 minutes...
- teutonic terror
- Brew Master
- Posts: 635
- Joined: Fri Aug 09, 2013 2:16 pm
- Location: Virginia
Re: Palisade hops
Thanks Beer-lord and PapaG!
Re: Palisade hops
I'm heading out the LHBS right now but when I get back I'll post the Palisade Blonde we did. It was quite good (note the past tense).
Sibling Brewers
- teutonic terror
- Brew Master
- Posts: 635
- Joined: Fri Aug 09, 2013 2:16 pm
- Location: Virginia
Re: Palisade hops
Sorry I haven't done it yet. Got home way later than planned. Also wanted to ask which recipe category it belonged in. I need my brother to help me as I've only post one so far. He is still resolving PC problems at the moment. Will put it in Advanced recipes ASAP
Sibling Brewers
- teutonic terror
- Brew Master
- Posts: 635
- Joined: Fri Aug 09, 2013 2:16 pm
- Location: Virginia
Re: Palisade hops
This is what I've settled on for these hops.
Was gonna do a BIAB and 2.5 gallons but decided to lower the ABV a bit and use the mash tun.
Look it over and let me know what y'all think!
Thanks!
BeerSmith 2 Recipe Printout - http://www.beersmith.com
Recipe: 'Rillosades
Brewer: JohnEC and The Boss
Asst Brewer:
Style: American Pale Ale
TYPE: All Grain
Taste: (30.0)
Recipe Specifications
--------------------------
Boil Size: 4.50gal
Post Boil Volume: 3.64 gal
Batch Size (fermenter): 3.50 gal
Bottling Volume: 3.50 gal
Estimated OG: 1.045 SG
Estimated Color: 3.5 SRM
Estimated IBU: 59.3 IBUs
Brewhouse Efficiency: 72.00 %
Est Mash Efficiency: 72.0 %
Boil Time: 60 Minutes
Ingredients:
------------
Amt Name Type # %/IBU
6 lbs Pale Malt (2 Row) US (2.0 SRM) Grain 1 100.0 %
0.50 oz Palisade [5.60 %] - First Wort 60.0 min Hop 2 18.6 IBUs
0.50 oz Palisade [5.60 %] - Boil 20.0 min Hop 3 10.2 IBUs
1.00 oz Amarillo Gold [9.80 %] - Boil 10.0 min Hop 4 21.4 IBUs
1.00 oz Palisade [5.60 %] - Boil 7.0 min Hop 5 9.1 IBUs
1.0 pkg Nottingham Yeast (Lallemand #-) [23.66 m Yeast 6 -
1.00 oz Amarillo Gold [9.20 %] - Dry Hop 0.0 Day Hop 7 0.0 IBUs
Mash Schedule: Single Infusion, Medium Body, Batch Sparge
Total Grain Weight: 6 lbs
----------------------------
Name Description Step Temperat Step Time
Mash In Add 7.50 qt of water at 167.4 F 152.0 F 60 min
Sparge: Batch sparge with 2 steps (0.92gal, 2.07gal) of 168.0 F water
Notes:
------
Created with BeerSmith 2 - http://www.beersmith.com
-------------------------------------------------------------------------------------
Was gonna do a BIAB and 2.5 gallons but decided to lower the ABV a bit and use the mash tun.
Look it over and let me know what y'all think!
Thanks!
BeerSmith 2 Recipe Printout - http://www.beersmith.com
Recipe: 'Rillosades
Brewer: JohnEC and The Boss
Asst Brewer:
Style: American Pale Ale
TYPE: All Grain
Taste: (30.0)
Recipe Specifications
--------------------------
Boil Size: 4.50gal
Post Boil Volume: 3.64 gal
Batch Size (fermenter): 3.50 gal
Bottling Volume: 3.50 gal
Estimated OG: 1.045 SG
Estimated Color: 3.5 SRM
Estimated IBU: 59.3 IBUs
Brewhouse Efficiency: 72.00 %
Est Mash Efficiency: 72.0 %
Boil Time: 60 Minutes
Ingredients:
------------
Amt Name Type # %/IBU
6 lbs Pale Malt (2 Row) US (2.0 SRM) Grain 1 100.0 %
0.50 oz Palisade [5.60 %] - First Wort 60.0 min Hop 2 18.6 IBUs
0.50 oz Palisade [5.60 %] - Boil 20.0 min Hop 3 10.2 IBUs
1.00 oz Amarillo Gold [9.80 %] - Boil 10.0 min Hop 4 21.4 IBUs
1.00 oz Palisade [5.60 %] - Boil 7.0 min Hop 5 9.1 IBUs
1.0 pkg Nottingham Yeast (Lallemand #-) [23.66 m Yeast 6 -
1.00 oz Amarillo Gold [9.20 %] - Dry Hop 0.0 Day Hop 7 0.0 IBUs
Mash Schedule: Single Infusion, Medium Body, Batch Sparge
Total Grain Weight: 6 lbs
----------------------------
Name Description Step Temperat Step Time
Mash In Add 7.50 qt of water at 167.4 F 152.0 F 60 min
Sparge: Batch sparge with 2 steps (0.92gal, 2.07gal) of 168.0 F water
Notes:
------
Created with BeerSmith 2 - http://www.beersmith.com
-------------------------------------------------------------------------------------