Attenuation Improvement
Moderators: BlackDuck, Beer-lord, LouieMacGoo, philm00x, gwcr
Re: Attenuation Improvement
Yeah, I like my saisons really dry, but I would really not like a 95%+ ESB or Bitter or Mild so much.
- Funky Skunk Brewing
- Fully Fermented
- Posts: 394
- Joined: Wed Dec 04, 2013 1:03 pm
- Location: Otto, NC
- Contact:
Re: Attenuation Improvement
Perhaps my response did not come across as it was intended. I did not mean to say all my beers I wanted that high. Sorry for the confusion theremashani wrote:Yeah, I like my saisons really dry, but I would really not like a 95%+ ESB or Bitter or Mild so much.
Re: Attenuation Improvement
I didn't see it mentioned, but do you have any idea WHY your attenuation is improving?
- Funky Skunk Brewing
- Fully Fermented
- Posts: 394
- Joined: Wed Dec 04, 2013 1:03 pm
- Location: Otto, NC
- Contact:
Re: Attenuation Improvement
None to speak of really. Each brew day we try to tighten things up in regards to procedures, timing of steps, etc. But nothing I can really point to and say "this is why". I just found it interesting and wondered who on the Borg kept track of theirs as well. Just a curiosity thing really.Kealia wrote:I didn't see it mentioned, but do you have any idea WHY your attenuation is improving?
e: Attenuation Improvement
Those of us that record the OG/FG sorta keep track of our attenuation. We do our pre-brew calculations, and see how close we get to it. I initially increase mine by upping the water to grain ratio.
The Nong Brewery defines "Fermentation" as: Making "Rot" a Good Thing
Welcome to the BeerBorg Information Center. You will be assimilated. Resistance is Quite Futile: WE have BEER.
Welcome to the BeerBorg Information Center. You will be assimilated. Resistance is Quite Futile: WE have BEER.
Re: Attenuation Improvement
I keep track but I don't stress about as much as some folks seem to do too much except for certain beers. Even so, I would not consider my beer "ruined" if I am over or under by a handful of points like some folks seem to do. I roll my eyes when I see people bitch about missing their OG/FG by a handful of points and acting as if they ruined their beer. It's still beer. It pretty much always still tastes good unless you did something else wrong / infected it / etc. So my theory is shut up and drink it LOL.
Now if I was in a commercial environment and brewing a beer for regular distribution I'd want to keep it as close to the same dialed in amount as is possible. But that's just usually a matter of refining your process and being able to control it and keep it consistent. (mash and fermentation temperatures/pitch rate/etc.).
Now if I was in a commercial environment and brewing a beer for regular distribution I'd want to keep it as close to the same dialed in amount as is possible. But that's just usually a matter of refining your process and being able to control it and keep it consistent. (mash and fermentation temperatures/pitch rate/etc.).
Re: Attenuation Improvement
Mine are a bit all over, some quite high, others quite low. I am only an egg.
Making beer and stew for the Zombie Apocalypse.
Never mind, there it is.
Never mind, there it is.