Vinnie's 10 factors to making better hoppy beers

Ask about and share you All Grain techniques.

Moderators: BlackDuck, Beer-lord, LouieMacGoo, philm00x, gwcr

User avatar
mashani
mashani
mashani
Posts: 6743
Joined: Sat Aug 10, 2013 11:57 pm

Re: Vinnie's 10 factors to making better hoppy beers

Post by mashani »

So, if you cold crash before you secondary it, should you cold crash again before bottling????
You can but you might want to toss in some yeast at bottling time then for bottle conditioning if you crash it multiple times.
User avatar
BlackDuck
Moderator
Moderator
Posts: 5156
Joined: Wed Aug 07, 2013 7:49 am
Location: Canal Winchester, Ohio

Re: Vinnie's 10 factors to making better hoppy beers

Post by BlackDuck »

mashani wrote:
So, if you cold crash before you secondary it, should you cold crash again before bottling????
You can but you might want to toss in some yeast at bottling time then for bottle conditioning if you crash it multiple times.
Thanks for the answer....that is exactly what I was wondering about. With careful transfer to the bottling bucket, it may not need a second cold crash. Only one way to find out!!!!
ANTLER BREWING
Drinking
#93 - Gerst Amber Ale
Conditioning and Carbing

Fermenting

On Deck
User avatar
braukasper
Fully Fermented
Fully Fermented
Posts: 465
Joined: Thu Apr 17, 2014 8:08 am

Re: Vinnie's 10 factors to making better hoppy beers

Post by braukasper »

If you do any lengthy aging it is a good idea to add some fresh yeast, I always loved using a champagne yeast for that. How do you add your yeast. I make a very small starter to add to the priming solution
Lebe das Leben. Um in vollen Zügen. Trinken zu Hause brauen!
Live life. To the fullest. Drink home brew!!
User avatar
mashani
mashani
mashani
Posts: 6743
Joined: Sat Aug 10, 2013 11:57 pm

Re: Vinnie's 10 factors to making better hoppy beers

Post by mashani »

FWIW, even if you hate T-58 as a brewing yeast, it works well as a bottling yeast - even for clean beers as there is such a small fermentation going on there it doesn't produce noticeable flavors. As a bottling yeast it produces about the thinnest bottle trub layer of any beer yeast which is it's advantage here.

As a dry yeast you can simply sprinkle a grain or two of it into each bottle at priming time, but you could make a small starter and mix it into the bottling bucket along with the priming solution if you want.
User avatar
Kealia
Brew Guru
Brew Guru
Posts: 5588
Joined: Thu Aug 08, 2013 10:52 pm

Re: Vinnie's 10 factors to making better hoppy beers

Post by Kealia »

BlackDuck wrote: So, if you cold crash before you secondary it, should you cold crash again before bottling????
*I* wouldn't bother. I've used gelatin (which is still going to pull out more than a cold crash or two IMO) and had no problems carbing up.
I wouldn't hesitate to crash twice (once before racking and then again after dry-hopping) and bottle without adding yeast. But that's just me.
User avatar
ScrewyBrewer
Uber Brewer
Uber Brewer
Posts: 1544
Joined: Tue Aug 13, 2013 9:11 pm
Location: Monmouth County, New Jersey
Contact:

Re: Vinnie's 10 factors to making better hoppy beers

Post by ScrewyBrewer »

I've been cold crashing my fermented beer for a week then moving the beer to a bottling bucket while still cold. Just did a hundred bottles of Stout a few weeks ago and they're perfectly carbed.
ezRecipe 'The easy way to awesome beer!'

'Give a man a beer and he'll waste an hour, teach him to brew beer and he'll waste a lifetime'
Post Reply