Is 140 IBUs Too Much?

Share an all grain or partial grain recipe that you like or want to get feedback from the Borg.

Moderators: BlackDuck, Beer-lord, LouieMacGoo, philm00x, gwcr

User avatar
Beer-lord
Moderator
Moderator
Posts: 9635
Joined: Mon Aug 05, 2013 2:48 pm
Location: Burbs of the Big Easy

Re: Is 140 IBUs Too Much?

Post by Beer-lord »

Yea you're right!
PABs Brewing
Planning
Brew good beer and live a hoppy life
Fermenting

Drinking
Disfucted
Smelly Hops
(split batch) A Many Stringed Bow
Up Next
Men In Black
User avatar
ScrewyBrewer
Uber Brewer
Uber Brewer
Posts: 1544
Joined: Tue Aug 13, 2013 9:11 pm
Location: Monmouth County, New Jersey
Contact:

Re: Is 140 IBUs Too Much?

Post by ScrewyBrewer »

bpgreen wrote:So the BU:GU chart is a helpful starting point, but we know that if we're brewing a high ABV beer and we're adding table sugar to up the abv and thin it out, the sugar will ferment almost completely, so the gravity it adds won't cause it to move lower on the perceived bitterness chart. On the flip side, if we add a bunch of steeping grains, they'll increase the OG, but will also increase the FG, so they'll make the final result seem less bitter.
My current IPA is estimated to be 140 IBUs and it started at 1.062 OG

I brushed up on my BU:GU numbers and came up with 140 ibu divided by 62 og equals a BU:GU ratio of 2.25.

Almost immediately I asked myself why isn't the FG used instead of the OG measurement? Depending on conditions too numerous to mention here a 1.062 beer that finishes at 1.012 will be dryer than one that finishes at 1.018.
ezRecipe 'The easy way to awesome beer!'

'Give a man a beer and he'll waste an hour, teach him to brew beer and he'll waste a lifetime'
bpgreen
Brew Guru
Brew Guru
Posts: 2008
Joined: Wed Aug 05, 2015 9:50 pm

Re: Is 140 IBUs Too Much?

Post by bpgreen »

ScrewyBrewer wrote:
bpgreen wrote:So the BU:GU chart is a helpful starting point, but we know that if we're brewing a high ABV beer and we're adding table sugar to up the abv and thin it out, the sugar will ferment almost completely, so the gravity it adds won't cause it to move lower on the perceived bitterness chart. On the flip side, if we add a bunch of steeping grains, they'll increase the OG, but will also increase the FG, so they'll make the final result seem less bitter.
My current IPA is estimated to be 140 IBUs and it started at 1.062 OG

I brushed up on my BU:GU numbers and came up with 140 ibu divided by 62 og equals a BU:GU ratio of 2.25.

Almost immediately I asked myself why isn't the FG used instead of the OG measurement? Depending on conditions too numerous to mention here a 1.062 beer that finishes at 1.012 will be dryer than one that finishes at 1.018.
If you think about it, neither OG nor FG or right in isolation. A beer that starts at 1.062 and finishes at 1.012 will have considerably less residual sweetness than one that starts at 1.042 and ends at 1.012.

The chart that was posted earlier is a handy starting point, but we need to assist based on our own knowledge and experience.
User avatar
Beer-lord
Moderator
Moderator
Posts: 9635
Joined: Mon Aug 05, 2013 2:48 pm
Location: Burbs of the Big Easy

Re: Is 140 IBUs Too Much?

Post by Beer-lord »

Vince, you are my hero!
PABs Brewing
Planning
Brew good beer and live a hoppy life
Fermenting

Drinking
Disfucted
Smelly Hops
(split batch) A Many Stringed Bow
Up Next
Men In Black
Post Reply