Weird Fermentation.

Yes BrewDemon and Mr. Beer kits are pretty darn easy but sometime you need a little help from the Borg to get you on the right track. Post your questions here!

Moderators: BlackDuck, Beer-lord, LouieMacGoo, philm00x, gwcr

Post Reply
User avatar
RandyG
Brew Fool
Brew Fool
Posts: 159
Joined: Wed Oct 02, 2013 4:41 pm

Weird Fermentation.

Post by RandyG »

Got a question for yinz. I brewed a batch of Cooper's Real Ale,and a Munton's Pilsner on Dec.2nd. After the 1st 24 or so hours the Pilsner had taken off and had a gathering of trub in the bottom and a nice krausen on top,but the Real Ale just had trub in the bottom. I check them evey day and after 5 more days the Real Ale had krausen on top.The temps hadn't changed,the fermenters weren't moved etc. Anyone have an answer or cause to why this happened?Just seems odd to me.TIA
User avatar
Dawg LB Steve
Brew Guru
Brew Guru
Posts: 2778
Joined: Fri Feb 07, 2014 7:39 pm
Location: Greater Cleveland East

Re: Weird Fermentation.

Post by Dawg LB Steve »

You're good! Could have been older yeast, less oxygenated wort, different gravities could have affected the lag time, different yeasts react differently, some are true top cropping and have a quick and active Krausen, some small, lingering Krausen. RDWHAHB!!
MONTUCKY BREWING
Currently brewing:

Next Up?
Kolsch?
Ginger Beer?
Traveling Red?
Yazoo Gerst Clone?
Peanut Butter Porter?

Currently Conditioning:
Cherry Mead
California Moscato

Currently enjoying:
Hardly Apple Cider on tap
Hardly Cherry Lime-Aid on tap
Oktoberfestive-Ale on tap
PGA Cider (Pear, Ginger, Apple) on tap 3rd Founders Cup 2016 King Of The Mountain on tap
Bottoms Up Brown on tap GOLD 2016 Ohio Brew Week Silver 2016 Ohio State Fair Silver 2016 Son of Brewzilla, Silver 2015 Son of Brewzilla, Bronze 2015 King Of The Mountain on tap
NITWIT BELGIAN STRONG ALE Banjo-Dawg RCE bottled
DAWG LB PALE ALE bottled
CITRA SLAPPED AMBER ALE bottle
MO FREEDOM SMaSH bottle
HOP TO IT IMPERIAL IPA bottle

Medal Count
Gold 3
Silver 5
Bronze 5
Actively brewing since December 2013
User avatar
RickBeer
Brew Guru
Brew Guru
Posts: 3099
Joined: Thu Aug 08, 2013 1:21 pm
Location: Ann Arbor, Michigan (Go Blue!)

Re: Weird Fermentation.

Post by RickBeer »

Krausen may have come and gone when you were sleeping. "I have trub at the bottom" is all that matters.
I have over 9,000 posts on "another forum", which means absolutely nothing. Mr. Beer January 2014 Brewer of the Month with all the pomp and circumstance that comes with it...

Certificate in Brewing and Distillation Technology

Sites to find beer making supplies: Adventures in Homebrewing - Mr. Beer - MoreBeer
My Beer - click to reveal
Currently using 6 LBKs.

Beers I regularly brew:
Bell's Best Brown clone
Irish Hills Red - I call this "Ann Arbor Red"
Mackinac Island Red - I call this "Michigan Red"
Oatmeal Stout - I call this Not Fat, Stout - Oatmeal Stout

Bottled 5 gallons of Ann Arbor Red on 4/18/17. Bottled 5 gallons of Michigan Red on 5/8/17.

Brewed in 2017 - 22.13 gallons (19.91 in 2012, 48.06 in 2013, 61.39 in 2014, 84.26 in 2015,46.39 in 2016)
Brewed in lifetime - 282.14 gallons
Drinkable beer on hand -  13.58 cases, with 6.11 cases ready in May and early June.
Average cost per 12 pack through all beer brewed - $6.27(ingredients only)
User avatar
mashani
mashani
mashani
Posts: 6743
Joined: Sat Aug 10, 2013 11:57 pm

Re: Weird Fermentation.

Post by mashani »

Sounds like long lag time. Trub at bottom forms as yeast grows and stuff drops out of suspension. But krausen won't happen until yeast have grown to a certain critical mass. It sounds like the yeast that came with the real ale was kind of old perhaps. But you should still get good beer out of it as long as you have good sanitation practices.

EDIT: Another thing to consider is Muntons Pilsner kit might have come with an actual lager yeast (some do, some do not, I can't say), where the Coopers kit came with a "real ale" yeast. They like totally different temperatures, with the lager yeast liking it a lot colder. The stuff that comes with the big Coopers cans really likes it more around 66-70 degrees. Less then 64 and it gets pretty sleepy. At least that used to be the case back in the day. (I have not made one of those for a while).
User avatar
Whamolagan
Braumeister
Braumeister
Posts: 936
Joined: Thu Aug 06, 2015 3:13 pm

Re: Weird Fermentation.

Post by Whamolagan »

Oxygen, the lack of it I would say
User avatar
mashani
mashani
mashani
Posts: 6743
Joined: Sat Aug 10, 2013 11:57 pm

Re: Weird Fermentation.

Post by mashani »

Lack of oxygen actually can shorten lag time (and over oxygenation - IE using pure O2 for too long - can actually increase lag time) because when the yeast run out of oxygen they can't grow anymore (and if they have lots of it they can grow more as long as they have all the other nutrients they need). In either case, once they run out of nutrients needed to grow, they have to switch into active fermentation. It might be a wimpy fermentation, with thin krausen, but something will happen. The long lag to me points more at low initial cell count (more generations need to grow) or too low temps.

The oxygen thing is the main reason why stir starters grow more cells. By continuously aerating the wort, you are keeping the yeast in growth mode (which is lag time) longer before they start to actively ferment your starter. Where a shaken starter or an ignored starter with all other things being equal will start to actively ferment sooner with less cells. Since the whole point is to grow as many cells as you can, adding the oxygen to keep it growing is a good thing.
Pudge
Fully Fermented
Fully Fermented
Posts: 451
Joined: Fri Aug 07, 2015 6:56 am

Re: Weird Fermentation.

Post by Pudge »

Dan Gordon once said on The Brewing Network that yeast won't begin fermentation until all oxygen in the wort has been utilized. So I agree, the amount of oxygenation greatly affects lag time.

Sounds like possibly poor yeast health in this situation. A little bit of some kind of nutrient in each fermentation can go a long way towards avoiding issues too.
Post Reply