What type of Bag do you use?

bpgreen · Post by **bpgreen** » Tue Jan 05, 2016 8:09 pm

I use paint strainer bags for BiaB and use jelly strainers for my homegrown hops (I don't bother with pellets).

TonyKZ1 · Post by **TonyKZ1** » Tue Jan 05, 2016 8:57 pm

I use a nylon bag that was included with a 1G all grain kit and then I've got a couple muslin bags for hops.

jimjohson · Post by **jimjohson** » Tue Jan 05, 2016 9:29 pm

I use a 6.5 gal sparge bag

: sparging_bag_65_gallon_bucket.jpg (74.26 KiB) Viewed 4634 times

JohnSant · Post by **JohnSant** » Tue Jan 05, 2016 9:37 pm

I'm going to Lowes this week and pick up a few items made from stainless steal, a connecting ring for a garbage disposal, some long bolts w/nuts, and a hose clamp. Using the hop sack I got from Wilserbrewer I'm going to make me a hop spider and see how this dose on material that is left in the kettle after boil. The hop sack I use now is from the LHBS and I get a lot of hop material in the kettle with it, so I'm hoping that this will eliminate some of it. I read somewhere that putting a ss nut in the hop sack, it will hold the sack in the boil better than letting it float around. I have seen hop spiders made out of PVC but I've seen these start to melt out of shape so thinking that a ss connecting ring would be better although may cost more, but only a one time cost if it works. One question I have with the Wilserbrewer bags for hops is; is more hops required to reach the desired level of bittering, flavoring, and smell?

Crazy Climber · Post by **Crazy Climber** » Sat Jan 16, 2016 10:29 pm

D_Rabbit wrote:Anyone use the hops bag they have at Wilsbrewer? I use paint strainer bags for my hops with my hop spider but they don't sit as low as I would like them to. Any reviews for that?

When I ordered my BIAB bag from Wilsbrewer, he included a hop bag with the order. I love it. Nice and long - I have a 10g TallBoy kettle and the hop bag reaches to the bottom of that kettle, when suspended from a homemade hop spider, as long as I put some marbles in the bag to weigh it down.
I would say that I've not had any adverse impact from using the bag (with it's fine mesh) over using a muslin sack. Yes, I'm sure commando yields greater utilization. But between the size/shape of the Wilsbrewer hop bag, and the reusability aspect, I'd definitely recommend it.

Rebel_B · Post by **Rebel_B** » Sat Jan 16, 2016 11:26 pm

JohnSant wrote:Ok I've been using a Bags from my LHBS and I've used Paint Bags from hardware stores. I know that a lot of brewers use the Wilserbrewer Bags http://biabbags.webs.com/ just wondering what those that use them think.

I get these at my work; my cost is $.80/ea...

: ImageUploadedByTapatalk1453004795.747999.jpg (48.65 KiB) Viewed 4576 times

Whamolagan · Post by **Whamolagan** » Sun Jan 17, 2016 2:33 pm

John Sand wrote:I also use paint store bags. They pass some flour, (I grind in a blender) and I have to watch for strain. I've read good things about Wilser Bags. He has sales sometimes.

Wait...what?!? you grind in a blender? How does that work? Do you get tannins in your beer? How does it not turn into flour? I haven't heard of that before, you have got my curiosity way peaked. That is what I love about this hobby, the things that people do that works for them.

JohnSant · Post by **JohnSant** » Tue Jan 19, 2016 8:27 am

Good news got my Hop spider built and I can say it is sweet. Used all stainless steel and didn't take all that long to make it was a little pricey compared to what some make but I know it will stand up to the heat and will be easy to clean. I used the Wilserbrewer bag I got when I ordered my BIAB from him. Once again tried to upload a picture but just can't seem to do it(maybe need to get my 8 yr. old grandson to help).

What type of Bag do you use?

Re: What type of Bag do you use?

Re: What type of Bag do you use?

Re: What type of Bag do you use?

Re: What type of Bag do you use?

Re: What type of Bag do you use?

Re: What type of Bag do you use?

Re: What type of Bag do you use?

Re: What type of Bag do you use?