BeerBorg

First time brewing. Just check to make sure everything is going good.
Day 2.

Sent from my SM-G930V using Tapatalk

If it's bubbling, or if there is foam on the wort, it's fermenting. If not, give it more time.

From the picture it looks like Co2 from the fermenter is pushing past the liquid in the bubbler. That’s a win in my book.

Yup, there's pressure in there. If not the two water levels would be equal on both sides. IT'S ALIVE!!!!

Thanks. It is burning along nice. .
My first brew and I almost stared off bad.
Mixed everything and checked it a few hours later. I thought it didnt look right and then I remembered the Three Stooges. I forgot to put the yeast In.
Put in the 2 packages and swished the fermenter around to mix it in.

Hope it turns out.

Sent from my SM-G930V using Tapatalk

moosehead wrote: Put in the 2 packages and swished the fermenter around to mix it in.

2 packs is good. One word of caution, watch when you swish it around and not loose yeast on the fermenter wall, I used to stir mine in but now just put it on top but I aerate a lot also.

moosehead wrote: Hope it turns out.

I'm sure it will, sounds like you are doing everything right.

berryman wrote:

moosehead wrote: Put in the 2 packages and swished the fermenter around to mix it in.

2 packs is good. One word of caution, watch when you swish it around and not loose yeast on the fermenter wall, I used to stir mine in but now just put it on top but I aerate a lot also.

moosehead wrote: Hope it turns out.

I'm sure it will, sounds like you are doing everything right.

I was just about to stir it and I realized I didnt have anything still sanitized. Didn't want to contaminate it.

Sent from my SM-G930V using Tapatalk