Going to take the next step in brewing

Yes BrewDemon and Mr. Beer kits are pretty darn easy but sometime you need a little help from the Borg to get you on the right track. Post your questions here!

Moderators: BlackDuck, Beer-lord, LouieMacGoo, philm00x, gwcr

Post Reply
User avatar
Brian N-
Newbie
Newbie
Posts: 31
Joined: Tue Aug 13, 2013 7:02 pm
Location: Long Island NY

Going to take the next step in brewing

Post by Brian N- »

I am going to go a "step up" in my brewing. So far I've done the basic Mr. Beer recipes with the addition of DME. Now I am going to try seeping some grains and add a hop boil. The Muntons/ Brewers Best kit included just about all I need. My plan is to split the 5 gallon kit into two LBK batches. I do have a question for the Borg - Do I need to sparge the grains, or can I just let the bag with the grains drain through a colander?
User avatar
Inkleg
Brew Guru
Brew Guru
Posts: 4582
Joined: Sun Aug 11, 2013 5:44 pm
Location: Lilburn, GA

Re: Going to take the next step in brewing

Post by Inkleg »

The times I steeped, I just let them drain and then squeezed the bag some. But you can do it either way.
I BIAB now and sometimes I just drain and squeeze other times I drain and sparge and squeeze.
Naked Cat Brewery On Tap
Yazoo Sue Smoked Porter
Octoberfest
Le Petite Saison
Czech Pale Lager
A Toast to Big Fuzzy Russian Imperial Stout at 10%
Belgian Blond
Flower Power IPA
4 Kilts Clueless Belgian Strong
One Wort Two Yeast with Wyeast 2206
One Wort Two Yeast with WLP940
Shipwreck Saison
User avatar
haerbob3
Braumeister
Braumeister
Posts: 840
Joined: Mon Aug 05, 2013 2:10 pm
Location: NW SE MI

Re: Going to take the next step in brewing

Post by haerbob3 »

With steeping there is no need to rinse/sparge the grains. Partial Mashing is not any harder than steeping. You just need to control the water temp and rinse/sparge the grains. I think it opens up a lot more options for the brewer.
im Leben Geduld ist eine Tugend
in Brau-es ist eine Anforderung

in life patience is a virtue
in brewing it is a requirement


You are stronger than you think you are!!!!
~~Andy Wesley 1973 -- 2013
User avatar
Brewbirds
Brew Guru
Brew Guru
Posts: 2814
Joined: Tue Aug 06, 2013 7:32 am
Location: A Tree Somewhere

Re: Going to take the next step in brewing

Post by Brewbirds »

Can you post some info or the recipe from your kit? It might help if others have done the same or one similar and you have questions on brew day.

:cheers:
Sibling Brewers
User avatar
Gymrat
Brew Guru
Brew Guru
Posts: 2155
Joined: Thu Aug 08, 2013 9:49 pm

Re: Going to take the next step in brewing

Post by Gymrat »

No need to sparge steeping grains. Just steep them for 20 minutes in water between 150 and 165F pull the bag out and squeeze runnings out if you want. Then that will be the water you add your extract, hops, etc to.
User avatar
Brian N-
Newbie
Newbie
Posts: 31
Joined: Tue Aug 13, 2013 7:02 pm
Location: Long Island NY

Re: Going to take the next step in brewing

Post by Brian N- »

I'm brewing the Muntons Red ale. The kit includes 2 cans of unhopped light extract, 2 packages of hops (1 oz golding and 1 oz fuggle) and a pound of grain (caramel and chocolate). The directions included with the kit are minimal.
User avatar
Yankeedag
THE BEER NONG
THE BEER NONG
Posts: 1362
Joined: Sat Aug 10, 2013 8:55 pm
Location: Texas...

Re: Going to take the next step in brewing

Post by Yankeedag »

Welcome to the step up. True, there is no actual need to sparge yor steep grains. Here is the "but". You can rinse them while bringing up your boil water levels to snag the very last of the good stuff.
I use the water I am topping of the water level with. No need to use boiling water for that.
So you can use that collender method you asked about. I do.
The Nong Brewery defines "Fermentation" as: Making "Rot" a Good Thing

:borg: Welcome to the BeerBorg Information Center. You will be assimilated. Resistance is Quite Futile: WE have BEER.
User avatar
FedoraDave
FedoraDave
FedoraDave
Posts: 4208
Joined: Fri Aug 09, 2013 5:52 pm
Location: North and west of the city
Contact:

Re: Going to take the next step in brewing

Post by FedoraDave »

You're going to be amazed at the difference this little upgrade makes (not to mention the ease of it; you'll wonder why you didn't make the leap earlier).

Good advice from everyone.
Obey The Hat!

http://www.homebrew-with-the-hat.com

Some regard me as a Sensei of Brewing
Fedora Brauhaus
Up Next:
FedoraDave's American Ale
Fermenting/Conditioning
Natural 20 Pale Ale -- Bull Terrier Best Bitter -- King Duncan's Porter -- Schöenwald Schwarzbier -- Littlejohn's Ale
Drinking:
Crown Top Pale Ale
User avatar
Brian N-
Newbie
Newbie
Posts: 31
Joined: Tue Aug 13, 2013 7:02 pm
Location: Long Island NY

Re: Going to take the next step in brewing

Post by Brian N- »

Thanks for the advice and encouragement. The brewing may have to wait a couple of weeks -the basement temperature is still too warm (about 75). Also, as with many of us, free time is difficult to find (fall yard work, closing the pool, Honey-do things, other hobbies ...etc) Next week I'm off to visit two of my children in college so no opportunity to brew.
User avatar
RickBeer
Brew Guru
Brew Guru
Posts: 3099
Joined: Thu Aug 08, 2013 1:21 pm
Location: Ann Arbor, Michigan (Go Blue!)

Re: Going to take the next step in brewing

Post by RickBeer »

I just did my first one since early June today. It's 66 in the basement and 60 outside right now. I plan on watch it for a few days to ensure it doesn't bump up over 70.
I have over 9,000 posts on "another forum", which means absolutely nothing. Mr. Beer January 2014 Brewer of the Month with all the pomp and circumstance that comes with it...

Certificate in Brewing and Distillation Technology

Sites to find beer making supplies: Adventures in Homebrewing - Mr. Beer - MoreBeer
My Beer - click to reveal
Currently using 6 LBKs.

Beers I regularly brew:
Bell's Best Brown clone
Irish Hills Red - I call this "Ann Arbor Red"
Mackinac Island Red - I call this "Michigan Red"
Oatmeal Stout - I call this Not Fat, Stout - Oatmeal Stout

Bottled 5 gallons of Ann Arbor Red on 4/18/17. Bottled 5 gallons of Michigan Red on 5/8/17.

Brewed in 2017 - 22.13 gallons (19.91 in 2012, 48.06 in 2013, 61.39 in 2014, 84.26 in 2015,46.39 in 2016)
Brewed in lifetime - 282.14 gallons
Drinkable beer on hand -  13.58 cases, with 6.11 cases ready in May and early June.
Average cost per 12 pack through all beer brewed - $6.27(ingredients only)
Post Reply