What are you drinking?

Vent, Rant, Chat or just talk about whatever is on your mind! Keep it civil though!

Moderators: BlackDuck, Beer-lord, LouieMacGoo, philm00x, gwcr

User avatar
berryman
Brew Guru
Brew Guru
Posts: 3279
Joined: Tue Aug 20, 2013 5:16 pm
Location: Western NY

Re: What are you drinking?

Post by berryman »

Image
Redneck blush wine......oh boy.


Sent from my iPhone using Tapatalk
Happy Hound Brewery

“I have not failed. I've just found 10,000 ways that won't work.”
― Thomas A. Edison
User avatar
John Sand
Brew Guru
Brew Guru
Posts: 4310
Joined: Wed Aug 07, 2013 9:01 pm
Location: Long Island NY

Re: What are you drinking?

Post by John Sand »

That's pretty.
I'm drinking 15 Minute PA. Brewed with a little extra hops, fermented cool with Notty. It's nice.
Making beer and stew for the Zombie Apocalypse.
Never mind, there it is.
User avatar
swenocha
Uber Brewer
Uber Brewer
Posts: 1992
Joined: Sun Aug 04, 2013 10:35 am

Re: What are you drinking?

Post by swenocha »

How could i not?Image

Sent from my SM-G955U using Tapatalk
Swenocha is a vast bastard of brewing knowledge - Wings_Fan_In_KC

Fermenting:
nada... zip...

Drinking:
nada... zip... maybe an N/A beer here and there...
User avatar
berryman
Brew Guru
Brew Guru
Posts: 3279
Joined: Tue Aug 20, 2013 5:16 pm
Location: Western NY

Re: What are you drinking?

Post by berryman »

First pour from my tap. A hopped up blonde. My thoughts: good beer as always, @ 38 degs, good, but slow pouring @ 12 psi flow tap wide open, might shorten the lines up some. Started a 10 foot. Will fine tune it.
Image


Sent from my iPhone using Tapatalk
Happy Hound Brewery

“I have not failed. I've just found 10,000 ways that won't work.”
― Thomas A. Edison
User avatar
swenocha
Uber Brewer
Uber Brewer
Posts: 1992
Joined: Sun Aug 04, 2013 10:35 am

Re: What are you drinking?

Post by swenocha »

I'm considering the same thing... at 10ft now, and it's a bit slow. I guess i should do the actual math...

Sent from my SM-G955U using Tapatalk
Swenocha is a vast bastard of brewing knowledge - Wings_Fan_In_KC

Fermenting:
nada... zip...

Drinking:
nada... zip... maybe an N/A beer here and there...
User avatar
berryman
Brew Guru
Brew Guru
Posts: 3279
Joined: Tue Aug 20, 2013 5:16 pm
Location: Western NY

Re: What are you drinking?

Post by berryman »

swenocha wrote:I'm considering the same thing... at 10ft now, and it's a bit slow. I guess i should do the actual math..
I actually have been studying flow charts and such and if anything I should be closer to 13 ft. I am not going to complain I guess if it takes a few seconds longer to pour a beer, longs it is just the right head and not over foamed or spill some, and it's doing that now.
Happy Hound Brewery

“I have not failed. I've just found 10,000 ways that won't work.”
― Thomas A. Edison
User avatar
berryman
Brew Guru
Brew Guru
Posts: 3279
Joined: Tue Aug 20, 2013 5:16 pm
Location: Western NY

Re: What are you drinking?

Post by berryman »

Fresh pour as I type.
Image


Sent from my iPhone using Tapatalk
Happy Hound Brewery

“I have not failed. I've just found 10,000 ways that won't work.”
― Thomas A. Edison
User avatar
berryman
Brew Guru
Brew Guru
Posts: 3279
Joined: Tue Aug 20, 2013 5:16 pm
Location: Western NY

Re: What are you drinking?

Post by berryman »

Pardon my Bud Light glass, far from being BL in there. I broke most of my good glasses and was given that one,
Happy Hound Brewery

“I have not failed. I've just found 10,000 ways that won't work.”
― Thomas A. Edison
User avatar
Kealia
Brew Guru
Brew Guru
Posts: 5588
Joined: Thu Aug 08, 2013 10:52 pm

Re: What are you drinking?

Post by Kealia »

Hahaha.

I would advise that if you are getting good pours, just a bit slow, to leave thing as they are (as berryman noted). There are a lot of nuances in getting a balanced system - even though it should be simple math - so if the worst thing you have is a slightly slow pour, accept it. Once you start fiddling around and then getting foamy pours, etc. it's a pain the ass to go back to what you had (need to re-buy longer lines).

Just one guy's opinion....I'm glad you both are having success and enjoying having beer on tap!
User avatar
mashani
mashani
mashani
Posts: 6743
Joined: Sat Aug 10, 2013 11:57 pm

Re: What are you drinking?

Post by mashani »

"Biscuits and Tea" - the Macha Green Tea English Bitter like beer I made. It isn't green, but the green tea did a good job of replacing EKG as the flavor/aroma hops (not saying it tastes the same but it does taste properly English beer like). Not a lot of aroma, what is there is spicy and a bit tannin like. It's actually a bit too bitter, I'd reduce the amount of Macha next time. Most recipes with green tea on the internet people complain it's not coming through even with as much as I used. I think they were using leaf tea or something. It certainly does with the powdered Macha tea. I'd use less next time.
User avatar
The_Professor
Uber Brewer
Uber Brewer
Posts: 1018
Joined: Wed Aug 14, 2013 4:52 pm
Location: Calif, USA

Re: What are you drinking?

Post by The_Professor »

So would an "Earl Gray" beer work?
No hops, black tea with bitter orange and lactose.
User avatar
swenocha
Uber Brewer
Uber Brewer
Posts: 1992
Joined: Sun Aug 04, 2013 10:35 am

Re: What are you drinking?

Post by swenocha »

Kealia wrote:Hahaha.

I would advise that if you are getting good pours, just a bit slow, to leave thing as they are (as berryman noted). There are a lot of nuances in getting a balanced system - even though it should be simple math - so if the worst thing you have is a slightly slow pour, accept it. Once you start fiddling around and then getting foamy pours, etc. it's a pain the ass to go back to what you had (need to re-buy longer lines).

Just one guy's opinion....I'm glad you both are having success and enjoying having beer on tap!
I'm pretty happy with the pours as they are (kolsch pour below as evidence), so will maybe/probably leave as is, but i usually can't help myself to tinker... ;)

Image

Sent from my SM-G955U using Tapatalk
Swenocha is a vast bastard of brewing knowledge - Wings_Fan_In_KC

Fermenting:
nada... zip...

Drinking:
nada... zip... maybe an N/A beer here and there...
User avatar
mashani
mashani
mashani
Posts: 6743
Joined: Sat Aug 10, 2013 11:57 pm

Re: What are you drinking?

Post by mashani »

The_Professor wrote:So would an "Earl Gray" beer work?
No hops, black tea with bitter orange and lactose.
I've heard of people doing it. You will need a bittering charge, or some wormwood or something if you want to go full on Gruit. I did use a small amount of hops for bittering in my Macha tea beer. I think the Bergamot is going to come through a lot stronger then the tea in the case of Earl Gray, I think if you used enough of the tea to actually taste it and provide enough bitter/tannins to balance the malt on its own the Bergamot might become overwhelming. So I think I'd treat Earl Gray beer as a herb beer where you want Bergamot to come through on the finish more then a beer you want Tea to come through.
User avatar
swenocha
Uber Brewer
Uber Brewer
Posts: 1992
Joined: Sun Aug 04, 2013 10:35 am

Re: What are you drinking?

Post by swenocha »

Went out tonight to Granite City Brewery for the first time in forever. Yes, a chain, but decent beer to be had. My understanding is that the wort is made at the main brewery location in MN and transported to the chains, and the fermentation proceeds in the local fermenters. Regardless, good (not great, but definitely solid all around) beers... sampler of their lager, bock, pale, and stout, and a glass of their DIPA. ImageImageImage

Sent from my SM-G955U using Tapatalk
Swenocha is a vast bastard of brewing knowledge - Wings_Fan_In_KC

Fermenting:
nada... zip...

Drinking:
nada... zip... maybe an N/A beer here and there...
User avatar
berryman
Brew Guru
Brew Guru
Posts: 3279
Joined: Tue Aug 20, 2013 5:16 pm
Location: Western NY

What are you drinking?

Post by berryman »

Drinking a hop Blonde, I love how the lacing ends up with a Buffalo Bills emblem, ha ha
Image


Sent from my iPhone using Tapatalk
Happy Hound Brewery

“I have not failed. I've just found 10,000 ways that won't work.”
― Thomas A. Edison
Post Reply