What are you brewing/bottling/kegging?

Vent, Rant, Chat or just talk about whatever is on your mind! Keep it civil though!

Moderators: BlackDuck, Beer-lord, LouieMacGoo, philm00x, gwcr

User avatar
Beer-lord
Moderator
Moderator
Posts: 9634
Joined: Mon Aug 05, 2013 2:48 pm
Location: Burbs of the Big Easy

Re: What are you brewing/bottling/kegging?

Post by Beer-lord »

We've all been there! Looks great too!
PABs Brewing
Planning
Brew good beer and live a hoppy life
Fermenting

Drinking
Disfucted
Smelly Hops
(split batch) A Many Stringed Bow
Up Next
Men In Black
User avatar
MrBandGuy
Fully Fermented
Fully Fermented
Posts: 355
Joined: Thu Aug 06, 2015 6:36 pm
Location: Southern Indiana

Re: What are you brewing/bottling/kegging?

Post by MrBandGuy »

Yep, just did that myself. After the sixth time of clearing the clog...beer rain!

Today, I’m making 7.5 G of a classic blonde. Been so hot lately. The extra 2.5 G I’m pulling and infusing with a lime tincture, which should be good for taco Tuesday around here. I’m guessing this heat will stick around a bit too!


Sent from my iPad using Tapatalk
User avatar
monsteroyd
Brew Master
Brew Master
Posts: 507
Joined: Wed Aug 07, 2013 1:16 pm
Location: Franklin NC USA

Re: What are you brewing/bottling/kegging?

Post by monsteroyd »

Saison!

I just did a LBK (2.25gal) of 2 lb 4oz light DME and cascade hops with the good old Belle Saison dry yeast. Can't wait!

Monty
User avatar
mashani
mashani
mashani
Posts: 6743
Joined: Sat Aug 10, 2013 11:57 pm

Re: What are you brewing/bottling/kegging?

Post by mashani »

monsteroyd wrote:Saison!
I just did a LBK (2.25gal) of 2 lb 4oz light DME and cascade hops with the good old Belle Saison dry yeast. Can't wait!
Monty
Yum. My next batch I think is going to be a raw beer that will likely turn out similar to "A Sorachi Ace" using Bella Saison and a metric *#%! ton of Sorachi Ace hops.
mashani wrote:6 gallons of pretty straight up Patersbier. 80% Pilsner, 20% malted oats, German Sapphire hops, and 3787. Can't get much more simple.
I bottled that. I only got the equivalent of 5.5 gallons out of it, the trub was pretty deep as all of the stuff that would have been "haze" due to the oats floc'd out with the yeast. So it will be a pretty clear beer for having 20% oats in it.
User avatar
TonyKZ1
Brew Master
Brew Master
Posts: 678
Joined: Fri Feb 20, 2015 12:19 pm
Location: Marble Hill, MO.

Re: What are you brewing/bottling/kegging?

Post by TonyKZ1 »

I just brewed a Simply Beer. Cream Ale today, it's a 5G Extract recipe from Midwest Supplies. The day before bottling, I'm going to add a bottle of Apricot flavoring for an Apricot Cream Ale.
Bailey's Billy Goat Brews
User avatar
swenocha
Uber Brewer
Uber Brewer
Posts: 1992
Joined: Sun Aug 04, 2013 10:35 am

Re: What are you brewing/bottling/kegging?

Post by swenocha »

Currently have a gluten reduced Guinness-ish Irish stout in ferment... Used hops I had on hand (since I have so much), but no EKG in the freezer (thought I had some left), so I went with Magnum.

6 lb Maris Otter
2 lb Flaked Barley
1 lb Black Barley (24 hour room temperature mash; added to boil in last 5 min)

1 oz Magnum

2 cans of Guinness, open air soured for 10 days, then introduced to the boil in the last 5 min
Irish Moss (10 min)
Clarity Ferm (1 vial, in fermenter)
WLP004 (Irish Ale Yeast)

Mash at 152 for 90 min
Ferment at 62

Est ABV 3.8%
Est IBU 45
Est SRM 32.7
Last edited by swenocha on Fri Aug 23, 2019 8:52 am, edited 1 time in total.
Swenocha is a vast bastard of brewing knowledge - Wings_Fan_In_KC

Fermenting:
nada... zip...

Drinking:
nada... zip... maybe an N/A beer here and there...
User avatar
Ricklust
Brew Fool
Brew Fool
Posts: 146
Joined: Fri Jan 12, 2018 10:49 am
Location: New Orleans La

Re: What are you brewing/bottling/kegging?

Post by Ricklust »

Fermenting a 3 Gal Saison for the Summer months.
Pilsen light LME
Sweet Orange Peel
Camomile
Lemon Grass
Coriander
Kent Golding Hops
Image


Sent from my iPhone using Tapatalk
Slainté ☘️
User avatar
Ricklust
Brew Fool
Brew Fool
Posts: 146
Joined: Fri Jan 12, 2018 10:49 am
Location: New Orleans La

Re: What are you brewing/bottling/kegging?

Post by Ricklust »

Just 4 Laughs
Boozer gets thirsty to. Image


Sent from my iPhone using Tapatalk
Slainté ☘️
User avatar
mashani
mashani
mashani
Posts: 6743
Joined: Sat Aug 10, 2013 11:57 pm

Re: What are you brewing/bottling/kegging?

Post by mashani »

Something I'm calling SoRawChi Ace Saison.

It's a raw beer (see my other posts about how to do that in more detail and the hows and whys of it), but for ~6 gallons it was:

10# Pilsner, 1# Malted Oats, step mashed from ~95 up to 150, 2.5 hour total mash duration, then sparged up to 6.5 gallons of volume.

8oz of Sorachi Ace hops commando added steeped for 1.5 hours at 150 to pasteurize (mash & boil fermentation lid on, autoclaved foam stopper in the airlock hole, and the whole top covered with foil overlapping the edges). I will get somewhere between 20-30 IBUs total from all of that, the rest is just flavor/aroma.

Slow chill overnight, will pitch Bella Saison tomorrow.

That's about it.

@RickLust, how do you like that Anvil fermenter? Might be an option for me when I replace my current 3 gallon plastic ones one day.
User avatar
Ricklust
Brew Fool
Brew Fool
Posts: 146
Joined: Fri Jan 12, 2018 10:49 am
Location: New Orleans La

Re: What are you brewing/bottling/kegging?

Post by Ricklust »

@Mashani

I started off with the plastic BD Fermenter and upgraded a few months later.
I pretty happy with the Anvil Fermenter. It’s ez to use and clean, also does a good job. I have the 4 gallon model. It seal very well.
Only drawback is the handles do not fold down. This may be a problem for some but does not affect me. It fits in my mini fridge.
I have not used any other so I don’t have anything to compare it to.
There a lot of info online if you want to research it first. Here’s one link.


https://www.homebrewfinds.com/2018/01/h ... entor.html

Hope this helps ya...Cheers [emoji481][emoji481]




Sent from my iPad using Tapatalk
Slainté ☘️
User avatar
Beer-lord
Moderator
Moderator
Posts: 9634
Joined: Mon Aug 05, 2013 2:48 pm
Location: Burbs of the Big Easy

Re: What are you brewing/bottling/kegging?

Post by Beer-lord »

I’m brewing today hopefully before it swelters out.
Mostly Maris Otter with just a touch of rye and crystal 40.
Trying out Medusa for the first time mixed with lots of Idaho 7 and some Vic Secret and using one of my favorite yeasts, Hansen yeast. Looking for an IPA on the lower end of gravity.


Sent from my iPhone using Tapatalk
PABs Brewing
Planning
Brew good beer and live a hoppy life
Fermenting

Drinking
Disfucted
Smelly Hops
(split batch) A Many Stringed Bow
Up Next
Men In Black
User avatar
Ricklust
Brew Fool
Brew Fool
Posts: 146
Joined: Fri Jan 12, 2018 10:49 am
Location: New Orleans La

Re: What are you brewing/bottling/kegging?

Post by Ricklust »

@Mashani

(Wish there was a way to edit a post) to correct spelling and add to the original post.

I can ferment 3-1/2 gallons in this 4 gallon Fermenter.
It has a nice head space. I have never needed a blow off tube yet. I have 2 of these so I can keep the pipeline in operation.
I use a different airlock than the one they included.
They do make a 7.5 gallon one but I never brew that much. Cleaning is a breeze compared to the plastic Fermenter I had because it opens up so well.

Cheers [emoji481][emoji481][emoji482]


Sent from my iPad using Tapatalk
Slainté ☘️
User avatar
Ricklust
Brew Fool
Brew Fool
Posts: 146
Joined: Fri Jan 12, 2018 10:49 am
Location: New Orleans La

Re: What are you brewing/bottling/kegging?

Post by Ricklust »

Beer-lord wrote:I’m brewing today hopefully before it swelters out.
Mostly Maris Otter with just a touch of rye and crystal 40.
Trying out Medusa for the first time mixed with lots of Idaho 7 and some Vic Secret and using one of my favorite yeasts, Hansen yeast. Looking for an IPA on the lower end of gravity.


Sent from my iPhone using Tapatalk
Happy Brewing Beer-Lord. U better get moving as it will be sweltering in one hour from now (if not already). I will post later on that Lemony Sippet recipe from Brewstock that has finished now.
Cheers [emoji482]



Sent from my iPad using Tapatalk
Slainté ☘️
User avatar
Beer-lord
Moderator
Moderator
Posts: 9634
Joined: Mon Aug 05, 2013 2:48 pm
Location: Burbs of the Big Easy

Re: What are you brewing/bottling/kegging?

Post by Beer-lord »

My wife loves Lemony Sippet. Please do update us!


Sent from my iPhone using Tapatalk
PABs Brewing
Planning
Brew good beer and live a hoppy life
Fermenting

Drinking
Disfucted
Smelly Hops
(split batch) A Many Stringed Bow
Up Next
Men In Black
User avatar
mashani
mashani
mashani
Posts: 6743
Joined: Sat Aug 10, 2013 11:57 pm

Re: What are you brewing/bottling/kegging?

Post by mashani »

Ricklust wrote:@Mashani

(Wish there was a way to edit a post) to correct spelling and add to the original post.

I can ferment 3-1/2 gallons in this 4 gallon Fermenter.
It has a nice head space. I have never needed a blow off tube yet. I have 2 of these so I can keep the pipeline in operation.
I use a different airlock than the one they included.
They do make a 7.5 gallon one but I never brew that much. Cleaning is a breeze compared to the plastic Fermenter I had because it opens up so well.

Cheers [emoji481][emoji481][emoji482]


Sent from my iPad using Tapatalk
You can edit posts from the web page view. I do it all the time because I'm always typing faster then my brain works and leaving typos behind. It must be a tapatalk limitation your running into.

Anyways, that sounds great. I can do 3 gallons in my fermenters with enough headspace that I never need to worry about blowoff, but that's the limit. I'm currently using the "mini Cooper" fermenters, so they are really easy to clean like yours, they are just an extra thick and more heat safe clear plastic bucket with a curved bottom and fancy lid/extender attachments, totally smooth on the inside. But one day they will fail and I will need something.

How hard is it to take the spigot off and clean the ball valve and such? The nice thing about the ones I'm using is that the spigots pop off with just one click, and the tops pop off just by opening the tap and giving it a 90 degree turn, so they are super easy to maintain. Having a spigot that I can use and not worry about is high on my list of important things.
Post Reply