Bourbon Barrel Porter
Moderators: BlackDuck, Beer-lord, LouieMacGoo, philm00x, gwcr
Bourbon Barrel Porter
This was a total guess on the recipe:
1 can Winter Dark Ale
1 lb dark DME
.25 oz Saaz 20 min
.25 oz Saaz 7 min
US-04 yeast
1/2 oz oak chips soaked in 4 oz Jim Beam for 2 weeks, then poured the bourbon and chips into the fermenter for the 3rd week of fermentation.
I just cracked one open at 3 weeks in the bottle and it is great. I was afraid the bourbon might overwhelm the beer but it blends well. It has nice roasted malt flavor. I think it will be even better in a few more weeks.
I have plenty of wood chips and Jim Beam left so may try a Bourbon Barrel Amber next.
1 can Winter Dark Ale
1 lb dark DME
.25 oz Saaz 20 min
.25 oz Saaz 7 min
US-04 yeast
1/2 oz oak chips soaked in 4 oz Jim Beam for 2 weeks, then poured the bourbon and chips into the fermenter for the 3rd week of fermentation.
I just cracked one open at 3 weeks in the bottle and it is great. I was afraid the bourbon might overwhelm the beer but it blends well. It has nice roasted malt flavor. I think it will be even better in a few more weeks.
I have plenty of wood chips and Jim Beam left so may try a Bourbon Barrel Amber next.
Re: Bourbon Barrel Porter
This sounds like a winner. I've got an extra Winter Dark from a Defibrilator Dopplebock Recipe I haven't made, figured now I'd wait until Aprilish to brew for next year. Maybe I'll go in this direction instead, and sooner too!
Kudos, great idea!
Kudos, great idea!
Re: Bourbon Barrel Porter
So...starting to really consider this.
Do you think 4 oz. of bourbon is the right amount? If you did it again would you go little more/little less?
Thanks!
Do you think 4 oz. of bourbon is the right amount? If you did it again would you go little more/little less?
Thanks!
- Crazy Climber
- Brew Master
- Posts: 664
- Joined: Mon Aug 05, 2013 8:29 pm
- Location: South Carolina
Re: Bourbon Barrel Porter
Glad yours came out good, docpd!
To ssorck's question, I'll add my two cents: I made a 2.4 gal batch of a Bourbon Barrel IPA in an LBK recently. I used 4 oz of Maker's Mark and 1 oz of oak cubes (chips impart flavor better than cubes, so I used more cubes than I would have if using chips). In my opinion, it tastes decent, but the aroma is strongly bourbon and not much else. Even the taste is a little more than I was shooting for, but still drinkable. But keep in mind, this is an IPA, which wouldn't have the malt-forward roasty flavors to stand up to the bourbon. So, it could well be that 4 oz is a good amount for a Porter.
I added the oak cubes to the secondary for 14 days, but not the bourbon itself. The method I used for adding the bourbon was to wait until bottling time, and I dosed a few 2-ounce samples of beer with varying amounts of bourbon, decided which one I liked best, and then scaled up. The end result was 4 oz for the whole batch.
I've used this sample-and-scale method for some other additives (fruit extract, spices) and I think it works very well, but the one suggestion I'd offer is: round down. What tastes perfect for a sip or two will probably be too strong over a pint or two. For example, I had three samples of the bourbon which equated to a batch addition of 2 oz, 4 oz and 6 oz. To me, the 4 was perfect at bottling time, but in retrospect I should have gone with 3 oz, IMO. (Again, keep in mind this was for an IPA, not a Porter or Stout.)
Whatever you choose to do, have fun with it!
To ssorck's question, I'll add my two cents: I made a 2.4 gal batch of a Bourbon Barrel IPA in an LBK recently. I used 4 oz of Maker's Mark and 1 oz of oak cubes (chips impart flavor better than cubes, so I used more cubes than I would have if using chips). In my opinion, it tastes decent, but the aroma is strongly bourbon and not much else. Even the taste is a little more than I was shooting for, but still drinkable. But keep in mind, this is an IPA, which wouldn't have the malt-forward roasty flavors to stand up to the bourbon. So, it could well be that 4 oz is a good amount for a Porter.
I added the oak cubes to the secondary for 14 days, but not the bourbon itself. The method I used for adding the bourbon was to wait until bottling time, and I dosed a few 2-ounce samples of beer with varying amounts of bourbon, decided which one I liked best, and then scaled up. The end result was 4 oz for the whole batch.
I've used this sample-and-scale method for some other additives (fruit extract, spices) and I think it works very well, but the one suggestion I'd offer is: round down. What tastes perfect for a sip or two will probably be too strong over a pint or two. For example, I had three samples of the bourbon which equated to a batch addition of 2 oz, 4 oz and 6 oz. To me, the 4 was perfect at bottling time, but in retrospect I should have gone with 3 oz, IMO. (Again, keep in mind this was for an IPA, not a Porter or Stout.)
Whatever you choose to do, have fun with it!
Crazy Climber:
I'm not particularly crazy (IMO), and I don't rock-climb. It's just the name of a video game I used to like to play, back in the 80's.
I'm not particularly crazy (IMO), and I don't rock-climb. It's just the name of a video game I used to like to play, back in the 80's.
Re: Bourbon Barrel Porter
I have used toasted oak and it imparted the flavor I was looking for.
Re: Bourbon Barrel Porter
I think I would agree with Crazy Climber that a bit less bourbon would be better in a lighter beer. So far I have only tasted one bottle and it is not fully conditioned yet, but I think the roasted and chocolate malts in the porter do balance the bourbon. I think Gymrat has done some Bourbon Barrel Ales. Maybe he will weigh in on this.
Re: Bourbon Barrel Porter
This was the Bourbon Barrel Stout I made.
I soaked the oak chips in 12 oz of bourbon for a week before adding them. I added a week after brewing. Upon bottling I tasted the wort and there wasn't quite enough bourbon character so I added 2 more oz to the bottling bucket. I used windsor ale yeast as I really wanted as much malt character as I could achieve. I also mashed at 158F.
BeerSmith 2 Recipe Printout - http://www.beersmith.com
Recipe: Ralph's Bourbon Barrel Porter
Brewer: Roger
Asst Brewer: Ralph The Wonderdog
Style: Robust Porter
TYPE: All Grain
Taste: (35.0)
Recipe Specifications
--------------------------
Boil Size: 5.70 gal
Post Boil Volume: 5.20 gal
Batch Size (fermenter): 5.00 gal
Bottling Volume: 5.00 gal
Estimated OG: 1.061 SG
Estimated Color: 37.1 SRM
Estimated IBU: 39.9 IBUs
Brewhouse Efficiency: 72.00 %
Est Mash Efficiency: 72.0 %
Boil Time: 60 Minutes
Ingredients:
------------
Amt Name Type # %/IBU
8 lbs 8.0 oz Pale Malt (2 Row) US (2.0 SRM) Grain 1 70.8 %
2 lbs Munich Malt - 10L (10.0 SRM) Grain 2 16.7 %
8.0 oz Caramel/Crystal Malt - 60L (60.0 SRM) Grain 3 4.2 %
8.0 oz Chocolate Malt (450.0 SRM) Grain 4 4.2 %
4.0 oz Black (Patent) Malt (500.0 SRM) Grain 5 2.1 %
4.0 oz Black Barley (Stout) (500.0 SRM) Grain 6 2.1 %
1.00 oz Goldings, East Kent [6.40 %] - First Wor Hop 7 25.8 IBUs
1.00 oz Goldings, East Kent [6.40 %] - Boil 20.0 Hop 8 14.2 IBUs
1.0 pkg Windsor Yeast (Lallemand #-) [23.66 ml] Yeast 9 -
1.00 oz Oak Chips (Primary 7.0 days) Flavor 10 -
Mash Schedule: Single Infusion, Medium Body, Batch Sparge
Total Grain Weight: 12 lbs
I sent Beer Lord one of these but I don't know if he has tried it.
I soaked the oak chips in 12 oz of bourbon for a week before adding them. I added a week after brewing. Upon bottling I tasted the wort and there wasn't quite enough bourbon character so I added 2 more oz to the bottling bucket. I used windsor ale yeast as I really wanted as much malt character as I could achieve. I also mashed at 158F.
BeerSmith 2 Recipe Printout - http://www.beersmith.com
Recipe: Ralph's Bourbon Barrel Porter
Brewer: Roger
Asst Brewer: Ralph The Wonderdog
Style: Robust Porter
TYPE: All Grain
Taste: (35.0)
Recipe Specifications
--------------------------
Boil Size: 5.70 gal
Post Boil Volume: 5.20 gal
Batch Size (fermenter): 5.00 gal
Bottling Volume: 5.00 gal
Estimated OG: 1.061 SG
Estimated Color: 37.1 SRM
Estimated IBU: 39.9 IBUs
Brewhouse Efficiency: 72.00 %
Est Mash Efficiency: 72.0 %
Boil Time: 60 Minutes
Ingredients:
------------
Amt Name Type # %/IBU
8 lbs 8.0 oz Pale Malt (2 Row) US (2.0 SRM) Grain 1 70.8 %
2 lbs Munich Malt - 10L (10.0 SRM) Grain 2 16.7 %
8.0 oz Caramel/Crystal Malt - 60L (60.0 SRM) Grain 3 4.2 %
8.0 oz Chocolate Malt (450.0 SRM) Grain 4 4.2 %
4.0 oz Black (Patent) Malt (500.0 SRM) Grain 5 2.1 %
4.0 oz Black Barley (Stout) (500.0 SRM) Grain 6 2.1 %
1.00 oz Goldings, East Kent [6.40 %] - First Wor Hop 7 25.8 IBUs
1.00 oz Goldings, East Kent [6.40 %] - Boil 20.0 Hop 8 14.2 IBUs
1.0 pkg Windsor Yeast (Lallemand #-) [23.66 ml] Yeast 9 -
1.00 oz Oak Chips (Primary 7.0 days) Flavor 10 -
Mash Schedule: Single Infusion, Medium Body, Batch Sparge
Total Grain Weight: 12 lbs
I sent Beer Lord one of these but I don't know if he has tried it.
Re: Bourbon Barrel Porter
Gymrat - on your initial addition you just added the wood chips, not the 12 oz of bourbon?
Re: Bourbon Barrel Porter
No..there was no way to add bourbon in beersmith. After soaking the chips in 12oz of bourbon for a week in a mason jar, I dumped all of the contents into the Ale Pail after 1 week of fermentation.
Re: Bourbon Barrel Porter
As an update, after several more weeks of conditioning, the Bourbon Barrel Porter is awesome. It has exactly the blend of malt base and bourbon flavor I was looking forward to.
Re: Bourbon Barrel Porter
Nice Doc. I love mine as well. At 6 months old it is a fantastic beer. It isn't a session beer but a nice occasional treat. And it made some really good chilli.
Re: Bourbon Barrel Porter
Snowed in today so I brewed this after bottling a couple of batches. Except I did .5 Saaz at both 20 and 7 minutes and swapped the lb of dark lme for a Mr. beer Brewmax Robust LME pack and 1/3 lb of Briess light DME, both of which I had on hand. Thanks for the recipe Doc!
Re: Bourbon Barrel Porter
Started writing a post to say this is active fermentation, and was gonna post this pic:
Literally as I was typing heard a big boom from the basement, lol...
1st keg overflow AND 1st keg blowup within 15 minutes of each other!!! Thankfully I had this one in a cooler with the lid down!
Literally as I was typing heard a big boom from the basement, lol...
1st keg overflow AND 1st keg blowup within 15 minutes of each other!!! Thankfully I had this one in a cooler with the lid down!
- FrozenInTime
- FrozenInTime
- Posts: 2815
- Joined: Mon Aug 05, 2013 10:19 pm
- Location: Frozen Tundra
Re: Bourbon Barrel Porter
Ohhhh yeaaaaaaaaaaaaaaaaaa, beer pron!!!!!!!!!!!!!!!!!!!!!!
Those look like some VERY happy yeasties!!!!
Those look like some VERY happy yeasties!!!!
Life is short, live it to it's fullest!
Re: Bourbon Barrel Porter
NICE!!! Prob scared the p00p outta you lol.