Re-hydrate
Moderators: BlackDuck, Beer-lord, LouieMacGoo, philm00x, gwcr
Re-hydrate
Do you all recommend rehydrating yeast safbrew s-33 for a one gallon batch?
Thanks
Thanks
- monsteroyd
- Brew Master
- Posts: 507
- Joined: Wed Aug 07, 2013 1:16 pm
- Location: Franklin NC USA
Re: Re-hydrate
I always rehydrate, but many do not. I learned that when dry yeast is re-hydrated, the yeast cannot control what goes through their cell membrane, so water is better for re-hydration then wort, which has sugars and stuff. So I re-hydrate with water. However, you are so over pitching in a gallon, that I doubt the extra work is worth it.
Monty
Monty
Re: Re-hydrate
You'll find a lot of opinions on this. So here's what I do......I don't rehydrate my dry yeast, even for a 5 gallon batch. If you read the instructions for S-33, it says to direct pitch as long as the wort is above 68 degrees, then let it sit for 30 minutes, then aerate. I follow their directions and have always had good success. You will find others here that rehydrate, and that works too.
ANTLER BREWING
Drinking
#93 - Gerst Amber Ale
Conditioning and Carbing
Fermenting
On Deck
Drinking
#93 - Gerst Amber Ale
Conditioning and Carbing
Fermenting
On Deck
Re: Re-hydrate
I have tried both ways and never noticed a difference in the finished product. To me it is just one more step on brew day that doesn't do anything but create extra work. Here is a good thread on the debate from the AHA forum
http://www.homebrewersassociation.org/f ... ic=16784.0
http://www.homebrewersassociation.org/f ... ic=16784.0
- FrozenInTime
- FrozenInTime
- Posts: 2807
- Joined: Mon Aug 05, 2013 10:19 pm
- Location: Frozen Tundra
Re: Re-hydrate
Follow the package directions. Some say to hydrate, some say pitch dry. They have done the testing and know what is best for the particular strain of yeast. I do what the package says for dry yeast, it has always worked for me.
Life is short, live it to it's fullest!
Re: Re-hydrate
Thanks to all. I will be aerating in a bit. I did not rehydrate.
OG At 1.062 for my first gallon brew of black beards IPA from the American home brewer.
Even with all I've read, I would still like to hear fermentation time suggestions including bottle conditioning and also a possible cold crash.
Please and thanks ahead.
AB
OG At 1.062 for my first gallon brew of black beards IPA from the American home brewer.
Even with all I've read, I would still like to hear fermentation time suggestions including bottle conditioning and also a possible cold crash.
Please and thanks ahead.
AB
- FrozenInTime
- FrozenInTime
- Posts: 2807
- Joined: Mon Aug 05, 2013 10:19 pm
- Location: Frozen Tundra
Re: Re-hydrate
3-4
3 weeks in the fermenting vessel
4 weeks in the bottle at room temp (2 weeks to carb, 2 weeks to condition)
then atleast 3 days in the chill box.
3 weeks in the fermenting vessel
4 weeks in the bottle at room temp (2 weeks to carb, 2 weeks to condition)
then atleast 3 days in the chill box.
Life is short, live it to it's fullest!
- FedoraDave
- FedoraDave
- Posts: 4208
- Joined: Fri Aug 09, 2013 5:52 pm
- Location: North and west of the city
- Contact:
Re: Re-hydrate
I always rehydrate my dry yeast, but that's just me. There's nothing that says your beer won't come out fine if you don't rehydrate. There's nothing that says you'll get better beer if you do rehydrate.
It's whatever suits you best.
It's whatever suits you best.
Obey The Hat!
http://www.homebrew-with-the-hat.com
Some regard me as a Sensei of Brewing
http://www.homebrew-with-the-hat.com
Some regard me as a Sensei of Brewing
Fedora Brauhaus
Re: Re-hydrate
I have found little difference in beers when I rehydrate vs just pitch so I stopped doing it for most batches. It does seem to make a difference when I make mead which could be because the must doesn't have the same nutrient levels that are in wort. I do still rehydrate yeast for high gravity beer batches 1.080 or higher just t9 give the yeast as good of a chance as I can.
Re: Re-hydrate
Thanks Duff
- jimjohson
- Brewer of the Month
- Posts: 2603
- Joined: Tue Jul 09, 2013 9:14 pm
- Location: Cusseta Ga
- Contact:
Re: Re-hydrate
I agree with both duff and FiT. for the most part I quit rehydrating, just an extra step on brew day with out clear benefits. unless, as FiT said, the yeast package says to. i.e. nottingham
"Filled with mingled cream and amber
I will drain that glass again.
Such hilarious visions clamber
Through the chambers of my brain
-- Quaintest thoughts -- Queerest fancies
Come to life and fade away;
Who cares how time advances?
I am drinking ale today."
Edgar Allan Poe
I will drain that glass again.
Such hilarious visions clamber
Through the chambers of my brain
-- Quaintest thoughts -- Queerest fancies
Come to life and fade away;
Who cares how time advances?
I am drinking ale today."
Edgar Allan Poe
- Funky Skunk Brewing
- Fully Fermented
- Posts: 394
- Joined: Wed Dec 04, 2013 1:03 pm
- Location: Otto, NC
- Contact:
Re: Re-hydrate
My thoughts on it as well. Why add another step just for the sake of adding another step. I have tried rehydrating and not and saw no noticeable differences in the beers either way. Like Dave said, it's up to you. Either you will or you won't it's up to you. And as others have stated, it's always best to follow what the packaging says, they know what they are doing.jimjohson wrote:I agree with both duff and FiT. for the most part I quit rehydrating, just an extra step on brew day with out clear benefits. unless, as FiT said, the yeast package says to. i.e. nottingham
Re: Re-hydrate
I went ahead and followed directions from the s-33.
- FedoraDave
- FedoraDave
- Posts: 4208
- Joined: Fri Aug 09, 2013 5:52 pm
- Location: North and west of the city
- Contact:
Re: Re-hydrate
I'm a little amused by those who perceive rehydrating as adding another step to the brew day. Okay, technically, yes, you're doing something more than opening the package and pouring it into the wort, but let's look at everything that's involved in that "extra step".
I take a Pyrex measuring cup and put approx. 1/4 cup of water in it and microwave it for 2 minutes, so it boils. Then I take it out and set it on the countertop with a thermometer in it. When the temperature gets down to 90-95 degrees, I sprinkle the yeast into it, where it sits for 15 or 20 minutes.
Sure is a strain to do all that while I'm taking at least 60 minutes boiling my wort, and another 15 or 20 minutes chilling it to pitching temperature.
I take a Pyrex measuring cup and put approx. 1/4 cup of water in it and microwave it for 2 minutes, so it boils. Then I take it out and set it on the countertop with a thermometer in it. When the temperature gets down to 90-95 degrees, I sprinkle the yeast into it, where it sits for 15 or 20 minutes.
Sure is a strain to do all that while I'm taking at least 60 minutes boiling my wort, and another 15 or 20 minutes chilling it to pitching temperature.
Obey The Hat!
http://www.homebrew-with-the-hat.com
Some regard me as a Sensei of Brewing
http://www.homebrew-with-the-hat.com
Some regard me as a Sensei of Brewing
Fedora Brauhaus
Re: Re-hydrate
For the sake of knowledge, and technique I will be rehydrating at some point I'm sure.